Development and validation of a sensitive liquid‐chromatography tandem mass spectrometry assay for mycophenolic acid and metabolites in HepaRG cell culture: Characterization of metabolism interactions between p‐cresol and mycophenolic acid

Mycophenolic acid (MPA), a frequently used immunosuppressant, exhibits large inter‐patient pharmacokinetic variability. This study (a) developed and validated a sensitive liquid chromatography–tandem mass spectrometry (LC–MS/MS) assay for MPA and metabolites [MPA glucuronide (MPAG) and acyl‐glucuronide (AcMPAG)] in the culture medium of HepaRG cells; and (b) characterized the metabolism interaction between MPA and p‐cresol (a common uremic toxin) in this in vitro model as a potential mechanism of pharmacokinetic variability. Chromatographic separation was achieved with a C₁₈ column (4.6 × 250 mm,5 μm) using a gradient elution with water and methanol (with 0.1% formic acid and 2 mm ammonium acetate). A dual ion source ionization mode with positive multiple reaction monitoring was utilized. Multiple reaction monitoring mass transitions (m/z) were: MPA (320.95 → 207.05), MPAG (514.10 → 303.20) and AcMPAG (514.10 → 207.05). MPA‐d₃ (323.95 → 210.15) and MPAG‐d₃ (517.00 → 306.10) were utilized as internal standards. The calibration curves were linear from 0.00467 to 3.2 μg/mL for MPA/MPAG and from 0.00467 to 0.1 μg/mL for AcMPAG. The assay was validated based on industry standards. p‐Cresol inhibited MPA glucuronidation (IC₅₀ ≈ 55 μm ) and increased MPA concentration (up to >2‐fold) at physiologically relevant substrate‐inhibitor concentrations (n = 3). Our findings suggested that fluctuations in p‐cresol concentrations might be in part responsible for the large pharmacokinetic variability observed for MPA in the clinic.     

基于LS -DYNA公路桥车桥耦合的车辆模型研究

研究公路桥梁在移动车辆荷载作用下的动力响应,建立合理的车辆模型非常重要。为更真实地体现桥梁在车载作用下的动力响应,基于LS-DYNA程序,结合常用重型车辆的结构特性及参数,对车辆的橡胶轮胎、轮胎内气体压力、车轮转动和车辆悬架系统进行模拟,使车辆模型更接近实际车辆。通过车辆轴重和动力特性初步验证车辆有限元模型的有效性;同时,以一座混凝土简支空心板梁桥为算例,验证车轮转动和车桥相互接触力,并将LS-DYNA计算结果与桥梁实测结果进行对比,进一步验证车辆有限元模型的有效性。研究结果表明,基于LS-DYNA建立的三维车辆有限元模型是可行的,可以用于研究车桥相互作用。     

The spin-isospin decomposition of the nuclear symmetry energy from low to high density

The energy per particle BA in nuclear matter is calculated up to high baryon density in the whole isospin asymmetry range from symmetric matter to pure neutron matter.The results,obtained in the framework of the Brueckner-Hartree-Fock approximation with two-and three-body forces,confirm the well-known parabolic dependence on the asymmetry parameterβ=(N?Z)/A(β^2 law)that is valid in a wide density range.To investigate the extent to which this behavior can be traced back to the properties of the underlying interaction,aside from the mean field approximation,the spin-isospin decomposition of BA is performed.Theoretical indications suggest that theβ^2 law could be violated at higher densities as a consequence of the three-body forces.This raises the problem that the symmetry energy,calculated according to theβ^2 law as a difference between BA in pure neutron matter and symmetric nuclear matter,cannot be applied to neutron stars.One should return to the proper definition of the nuclear symmetry energy as a response of the nuclear system to small isospin imbalance from the Z=N nuclei and pure neutron matter.     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Experimental and Numerical Investigation on Effects of the Steam Ingestion on the Aerodynamic Stability of an Axial Compressor

In order to investigate the influence of steam ingestion on the aerodynamic stability of a two-stage low-speed axial-flow compressor, multiphase flow numerical simulation and experiment were carried out. The total pressure ratio and stall margin of the compressor was decreased under steam ingestion. When the compressor worked at 40% and 53% of the nominal speed, the stall margin decreased, respectively, by 1.5% and 6.3%. The ingested steam reduced the inlet Mach number and increased the thickness of the boundary layer on the suction surface of the blade. The low-speed region around the trailing edge of the blade was increased, and the flow separation region of the boundary layer on the suction surface of the blade was expanded; thus, the compressor was more likely to enter the stall state. The higher the rotational speed, the more significant the negative influence of steam ingestion on the compressor stall margin. The entropy and temperature of air were increased by steam. The heat transfer between steam and air was continuous in compressor passages. The entropy of the air in the later stage was higher than that in the first stage; consequently, the flow loss in the second stage was more serious. Under the combined action of steam ingestion and counter-rotating bulk swirl distortion, the compressor stability margin loss was more obvious. When the rotor speed was 40% and 53% of the nominal speed, the stall margin decreased by 6.3% and 12.64%, respectively.     

Functional Binding Surface of a β‐Hairpin VEGF Receptor Targeting Peptide Determined by NMR Spectroscopy in Living Cells

In this study, the functional interaction of HPLW peptide with VEGFR2 (Vascular Endothelial Growth Factor Receptor 2) was determined by using fast ¹⁵N‐edited NMR spectroscopic experiments. To this aim, ¹⁵N uniformly labelled HPLW has been added to Porcine Aortic Endothelial Cells. The acquisition of isotope‐edited NMR spectroscopic experiments, including ¹⁵N relaxation measurements, allowed a precise characterization of the in‐cell HPLW epitope recognized by VEGFR2.     

Effect of high intensity ultrasound on gelation properties of silver carp surimi with different salt contents

Surimi from silver carp with different salt contents (0–5%) was obtained treated by high intensity ultrasound (HIU, 100 kHz 91 W·cm⁻²). The gelation properties of samples were evaluated by puncture properties, microstructures, water-holding capacity, dynamic rheological properties and intermolecular interactions. As the salt content increased from 0 to 5%, gel properties of surimi without HIU significantly improved. For samples with low-salt (0–2% NaCl) content, HIU induced obvious enhancement in breaking force and deformation. HIU promoted the protein aggregation linked by SS bonds, hydrophobic interactions and non-disulfide covalent bonds in surimi gels with low-salt content. Moreover, microstructures of HIU surimi gels with low-salt content were more compact than those of the corresponding control samples. HIU also improved the gelation properties of surimi with 3% NaCl to an extent. However, for high-salt (4–5% NaCl) samples, HIU decreased the breaking force and deformation of surimi gels due to the degradation of proteins suggested by increased TCA-soluble peptides. In conclusion, HIU effectively improved the gelation properties of surimi with low-salt content (0–2% NaCl), but was harmful for high-salt (4–5% NaCl) surimi. This might provide the theoretical basis for the production of low-salt surimi gels.     

A coupled immersed boundary‐lattice Boltzmann method with smoothed point interpolation method for fluid‐structure interaction problems

The immersed boundary‐lattice Boltzmann method has been verified to be an effective tool for fluid‐structure interaction simulation associated with thin and flexible bodies. The newly developed smoothed point interpolation method (S‐PIM) can handle the largely deformable solids owing to its softened model stiffness and insensitivity to mesh distortion. In this work, a novel coupled method has been proposed by combining the immersed boundary‐lattice Boltzmann method with the S‐PIM for fluid‐structure interaction problems with large‐displacement solids. The proposed method preserves the simplicity of the lattice Boltzmann method for fluid solvers, utilizes the S‐PIM to establish the realistic constitutive laws for nonlinear solids, and avoids mesh regeneration based on the frame of the immersed boundary method. Both two‐ and three‐dimensional numerical examples have been carried out to validate the accuracy, convergence, and stability of the proposed method in consideration of comparative results with referenced solutions.     

Noncovalent Intermolecular Interaction in Cofacially Stacked 24π Antiaromatic Hexaphyrin Dimer

π–π Stacking is omnipresent not only in nature but in a wide variety of practical fields applied to our lives. Because of its importance in a performance of natural and artificial systems, such as light harvesting system and working layer in device, many researchers have put intensive effort into identifying its underlying nature. However, for the case of π–π stacked systems composed of antiaromatic units, the understanding of the fundamental mechanisms is still unclear. Herein, we synthesized a new type of planar β,β’-phenylene-bridged hexaphyrin (1.0.1.0.1.0), referred as naphthorosarin which possesses the 24π-electron conjugated pathway. Especially, the corresponding antiaromatic porphyrinoid shows the unique property to form dimeric species adopting the face-to-face geometry which is unprecedented in cases of known annulated naphthorosarins. In order to elucidate the intriguing properties derived from the stacked dimer, the current study focuses on the experimental support to rationalize the observed π–π interactions between the two subunits.